This product is cost-effective, and easy to install & use. By default, it requires no configuration and installation, but can be managed using the powerful Web interface, and/or SNMP. With outstanding performance and quality, this product is a great choice for expanding your home, office, or airMax network.
Super Powers - Great Value
The manufacturer called this model 'Alien' because of its Super Powers.
Managed
The built-in web interface provides extensive control & monitoring features, including:
- PoE (Power over Ethernet). Including Auto Voltage detection (see below), and day-of-week & hourly power control. (E.g. disable PoE on port 6 between 6pm and 8am every week day).
- Port Control, including rate limiting, flow control, trunking and mirroring.
- VLANs (Virtual LANs) including binding MAC addresses to VLAN IDs
- QoS (Quality of Service), including COS, DSCP, and DSCPCOS
- STP, MSTP, RSTP (Spanning Tree Protocol, Rapid STP, Multiple STP)
- SNMP (Simple Network Management Protocol) (
MIB files)
- LACP (Link Aggregation Control Protocol)
- ACLs (Access Control Lists)
- AAA (Authentication, Authorization and Accounting), including RADIUS+ and 802.1x.
- SNTP (Simple Network Time Protocol)
- GRMP (GARP Multicast Registration Protocol)
- EAPS & ERPS (Ethernet Automatic Protection Switching & Ethernet Ring Protection Switching). These are powerful 'ring' protocols that link 3 or more of these devices in a self-healing, fault-tolerant ring network, with sub 50 millisecond recovery times.
- RMON (Remote Monitoring)
- NDP/NTDP (Neighbour Discovery Protocol & Neighbour Topology Discovery Protocol). Used to build Clusters.
- ... and more. (Click Specifications below to read the full datasheet.)
Auto PoE - 3 Modes
By default, ports 1 to 8 auto-negotiate PoE voltage:
- 48V 802.3af/at PoE on pins 1,2,3,6, or
- 24V passive PoE on pins 4,5,7,8 or
- No PoE (e.g. for non-PoE devices)
Using the management interface, each PoE port can be set as below:
- Off - No PoE
- Auto - See above.
- Auto - 24V only (PoE on if 24V device connected)
- Auto - 48V only (PoE on if 802.3af/at device connected)
- Force 24V
- Force 48V
Features
- All metal construction
- 3 Year, return to Australia warranty
- 8 x Full Gigabit PoE Switch with 2 SFP (1 Gbps) ports
- Input Power (Use one only)
- AC: 110~265V 50/60Hz, or
- DC: 48~57V, 5A, 2.5mm DC plug
- Supports PoE power up to 30W for each port
- Supports 3 PoE modes: 48V PoE IEEE 802.3af/at (Mode A, pins 1,2,3,6), 24V Passive PoE (pins 4,5,7,8), and No PoE (for non-POE devices like PCs)
- Support 0, 24, and 48V PoE Output, with auto-detecting plug and play
- Short-circuit protection and Over-current protection
- Internal 150W power supply with Australian power cord
- Dimensions / Weight: 208 x 140 x 44 mm / 1.15 kg
- Suitable for 48V 802.3af/at and 24V PoE powered devices like many wireless APs, CPEs, IP-cameras, VoIP phones, etc.
- Suitable for non-PoE devices such as PCs
- Ideal for Ubiquiti 48V (e.g. UniFi) and 24V (e.g. airMax) powered devices
SFP Compatibility Testing
We have confirmed this product works with these SFP modules, and presumably many others.
Documentation
Shipping Weights & Dimensions for 1 carton of 20 each
Dimensions: 47 x 56 x 40 cm
Volume: 0.1053 m3
Volumetric Weight: 26.33 kg
Dead Weight: 38.00 kg
