Managed,Industrial,DC 24/48V PoE Switch

This is a DC Powered, Industrial, 24-48V PoE Switch, with powerful and feature-rich management.

DC Power

Flexible DC power options.

• DC Inputs 1 & 2 are intended for nominal 48V DC input. See Compatible Products (below) for suitable power supplies.
• DC Input 3 will accept from 12 to 57 VDC. This can be used to directly connect a Solar Panel.

Managed

The built-in web interface provides extensive control & monitoring features, including:

• PoE (Power over Ethernet). Including Auto Voltage detection (see below), and day-of-week & hourly power control. (E.g. disable PoE on port 6 between 6pm and 8am every week day).
• Port Control, including rate limiting, flow control, trunking and mirroring.
• VLANs (Virtual LANs) including binding MAC addresses to VLAN IDs
• QoS (Quality of Service), including COS, DSCP, and DSCPCOS
• STP, MSTP, RSTP (Spanning Tree Protocol, Rapid STP, Multiple STP)
• SNMP (Simple Network Management Protocol) ( MIB files)
• LACP (Link Aggregation Control Protocol)
• ACLs (Access Control Lists)
• AAA (Authentication, Authorization and Accounting), including RADIUS+ and 802.1x.
• SNTP (Simple Network Time Protocol)
• GRMP (GARP Multicast Registration Protocol)
• EAPS & ERPS (Ethernet Automatic Protection Switching & Ethernet Ring Protection Switching). These are powerful 'ring' protocols that link 3 or more of these devices in a self-healing, fault-tolerant ring network, with sub 50 millisecond recovery times.
• RMON (Remote Monitoring)
• NDP/NTDP (Neighbour Discovery Protocol & Neighbour Topology Discovery Protocol). Used to build Clusters.
• ... and more. (Click Specifications below to read the full datasheet.)

Industrial

-40℃～80℃ working temperature range, and 8kV ESD Contact discharge protection.

Mounting

Two options available (See images):

• DIN Rail: Clips onto a standard DIN rail.
• Wall mount: Wall mounting brackets included.

10 Network Ports

• 8 x 100/1000 Mbps RJ45 ports (Auto Negotiation/Auto MDI/MDIX)
• 2 x 1000 Mbps SFP ports

Auto PoE - Multiple Modes

The Auto-PoE technology built into this product uses intelligent sensing to determine the correct PoE voltage/power to apply:

• 48V
  • 802.3bt : 60W, 4-pair POE (Ports 1 & 2 only)
  • 802.3at+: 30W, 4-pair POE (Ports 1 & 2 only)
  • 802.3at : 30W, 2-pair, Pins 1,2 (+) 3,6(-) (Ports 3 to 8 only)
  • 802.3af : 15W, 2-pair, Pins 1,2 (+) 3,6(-) (Ports 3 to 8 only)
• 24V
  • passive PoE on pins 4,5 (+) 7,8(-) (Ports 3 to 8 only)
• No PoE
  • for non-PoE devices. All ports.

The management software allows overrides of the above default behaviour.

Alarms

Alarm triggers can be internal (e.g. High temp, low voltage, ..) and/or external signals (e.g. high or low voltage). Once triggered, and alarm can be notified digitally (e.g. SNMP TRAPs and/or to a log file), and/or physically (e.g. closing a relay to sound an alarm).

Fast Loop

Three or more devices can be linked in a redundant, self-healing network loop, with sub 50 millisecond (typically 20 millisecond) recovery times in the event of a link failure. Both EAPS & ERPS ring protocols are available.

Other Features

• Metal construction
• 5 Year, return to Australia warranty
• Short-circuit protection and Over-current protection
• Suitable for non-PoE devices such as PCs
• Ideal for Ubiquiti 48V (e.g. UniFi) and 24V (e.g. airMax) powered devices

Specifications - Hardware

Specifications - Software

Specifications - Other

Documentation

• Quick Start Guide
• Quick Installation Guide
• User Guide
• CLI Guide
• CLI Guide - PoE
• MIBs